mpckit/tools/checkpoint-a

Device checkpoint A

Projects written by the Go writer (internal/xpj, internal/project, internal/export) through mpckit-cli, for build plan section 7, checkpoint A. Build the pack from the repo root:

tools/checkpoint-a/build.sh            # writes mpckit-checkpoint-a.zip

It needs Go and python3 (for the zip). Samples come from testdata/device/DemoFile_[ProjectData]; the test tones come from gentone, which writes the same tone as the WAV test pack (0.8 s at 440 Hz, then a 0.2 s beep an octave higher as an end marker).

Each risky item is in its own project, so one that fails to load does not hide the others.

Projects and what to check

MpckitKit: kit, tuning extremes, choke, lengths (A1, A2, A3, A5)

Pad	Sample	Setting
A1	kick
A2	snare
A3	hat 1	mute group 1
A4	hat 2	mute group 1
B1	bass (C)	none: the reference pitch
B2	bass	-24 semitones
B3	bass	+24 semitones
B4	bass	-90 cents
B5	bass	+90 cents
B6	bass	-24 semitones, -90 cents
B7	bass	+24 semitones, +90 cents

Sequences: 1 "One Bar" (120 BPM, 1 bar), 2 "Long" (120 BPM, 64 bars).

1. The project loads; A1-A4 and B1 play.
2. B2-B7 show the tuning in the table and sound shifted against B1 (two octaves down/up for B2/B3, just under a semitone for B4/B5).
3. A3 and A4 cut each other off. Note the highest mute group number the device's pad settings offer.
4. Sequence 1 shows 1 bar and sequence 2 shows 64 bars; both loop at their length.

MpckitMute: high mute group numbers (A3)

A1 and A2 (hats) in group 16; A3 and A4 in group 32.

1. Does the project load?
2. What group does each pad show? Do A1/A2 choke each other, and A3/A4?

MpckitTempo: BPM extremes (A5)

Kick on A1. Sequences: 1 "Slow" 30 BPM, 2 "Fast" 300 BPM, 3 "Very Slow" 20 BPM, 4 "Very Fast" 999 BPM (2 bars each).

1. Does the project load?
2. What BPM does each sequence show? (20 and 999 are probably outside the device's range: note whether it clamps them, and to what. Also note the device's own BPM range from its tempo control.)

MpckitWav: extensible WAV headers (section 7, "Not yet tested")

Pad	File
A1	44.1 kHz 16-bit mono, plain header (control)
A2	48 kHz 24-bit stereo, extensible header
A3	44.1 kHz 16-bit stereo, extensible header
A4	44.1 kHz 16-bit mono, extensible header

1. The project loads, and A2-A4 match A1 in pitch and length, with the end beep heard.

Results

To fill in after the device run, then copy into the format doc (section 7) and the build plan (section 7, checkpoint A).

Project	Loads	Result
MpckitKit
MpckitMute
MpckitTempo
MpckitWav

Device mute group range: Device BPM range: